Audio-Wave
Pro-Ject Hi-Fi Set Bluetooth 1
Pro-Ject Hi-Fi Set Bluetooth 1
Low stock
Couldn't load pickup availability
SKU:PAOTTB90110+MKESSRCR35BT
Pro-Ject HiFi Set Bluetooth 1
The Pro-Ject HiFi Set Bluetooth 1 is a complete vinyl listening package designed to make getting started with records simple. Combining the Pro-Ject E1.2 BT turntable, Mackie CR3.5BT powered speakers, and Pro-Ject Cleaning Set Basic, this set brings together quality vinyl playback, versatile connectivity, and essential record-care accessories in one convenient package.
1. Pro-Ject E1.2 BT Turntable
The Pro-Ject E1.2 BT is a belt-driven turntable that combines quality analogue playback with modern Bluetooth connectivity. Featuring a precision-balanced aluminium platter, a pre-adjusted cartridge, and an aluminium tonearm, it offers an accessible introduction to vinyl listening without compromising on essential Hi-Fi design.
Key Features
-
Belt-drive system
-
Bluetooth audio transmission + Phono Preamp Built-in
-
Electronic speed selection: 33⅓ and 45 RPM
-
Pre-adjusted Pick it MM E cartridge
-
730 g die-cast aluminium platter
-
Glass-fibre-reinforced ABS sub-platter
-
8.6-inch aluminium tonearm
-
Carbon-reinforced headshell
-
Damped DC motor
-
Vibration-absorbing feet
-
Acrylic dust cover included
-
Handmade in Europe
Technical Specifications
| Specification | Details |
|---|---|
| Drive principle | Belt drive |
| Speeds | 33⅓ and 45 RPM |
| Speed change | Electronic |
| Platter | Die-cast aluminium with felt mat |
| Tonearm | 8.6-inch aluminium |
| Effective tonearm length | 218.5 mm |
| Effective tonearm mass | 7 g |
| Overhang | 22 mm |
| Signal-to-noise ratio | 65 dB |
| Power consumption | 4.5 W maximum |
| Power supply | 15 V DC / 0.8 A |
| Dimensions (W × H × D) | 420 × 112 × 330 mm |
| Net weight | 3.6 kg |
2. Mackie CR3.5BT Powered Speakers
The Mackie CR3.5BT is a compact pair of powered speakers designed for music listening, desktop setups, and multimedia use. With built-in amplification, Bluetooth streaming, adjustable tone control, and multiple wired inputs, these speakers provide a versatile listening solution for your turntable and other compatible audio sources.
Key Features
-
3.5-inch woven woofer
-
1-inch silk-dome tweeter with protective grille
-
50 W RMS total system amplification
-
Class AB amplification
-
Built-in Bluetooth connectivity
-
Adjustable tone control for shaping bass and high-frequency response
-
Desktop and bookshelf listening modes
-
Balanced ¼-inch TRS inputs
-
RCA stereo inputs
-
3.5 mm stereo input
-
Front-panel headphone output
-
Compact design for desks, shelves, and smaller listening spaces
Technical Specifications
| Specification | Details |
|---|---|
| Speaker configuration | Powered stereo pair |
| Woofer | 3.5-inch woven driver |
| Tweeter | 1-inch silk dome |
| Total amplification | 50 W RMS |
| Amplifier class | Class AB |
| Frequency response (−3 dB) | 70 Hz – 20 kHz |
| Frequency response (−10 dB) | 60 Hz – 20 kHz |
| Maximum peak SPL | 100 dB |
| Bluetooth | Yes |
| Audio inputs | TRS, RCA, 3.5 mm |
| Headphone output | Yes |
| Dimensions per speaker (H × W × D) | 206 × 140 × 180 mm |
| Total system weight | Approximately 3.7 kg |
3. Pro-Ject Cleaning Set Basic
The Pro-Ject Cleaning Set Basic includes essential accessories for routine vinyl and stylus maintenance. Regular cleaning helps remove surface dust before playback and keeps your records and stylus in better condition, supporting more consistent listening and helping reduce unwanted surface noise caused by dirt.
Key Features
-
Brush it: Carbon-fibre record-cleaning brush for removing surface dust
-
Clean it: Dedicated carbon-fibre stylus-cleaning brush
-
Designed for regular vinyl-care maintenance
-
Helps keep records clean before playback
-
Compact accessory set for everyday use
Complete Package Contents
-
1 × Pro-Ject E1.2 BT turntable
-
1 × Mackie CR3.5BT powered speaker pair
-
1 × Pro-Ject Cleaning Set Basic
A complete vinyl listening setup with turntable, speakers, and essential cleaning accessories in one package.
Share
